(1) Prohibited tools, fixtures or workpiece bed, spindle gearboxes.
(2) After the machine spindle loading and unloading chuck should be shut down, face milling machine.
(3) When the slender workpiece is taken, it should be taken to ensure the safety center or with the tool holder, lathe parts should be significantly increased.
(4) With the workpiece clamped on top, the top and center holes should be exactly the same. Do not use damaged or skewed tops. The top and center holes should be cleaned before use. Peak back to prison.
(5) Wear tight protective clothing, do not open the cuffs, wear long hair with a helmet, and do not wear gloves.
(6) Put irregularly shaped workpieces, should balance the block, try to balance before cutting.
(7) Clamp the part of the workpiece chuck, dialing and protruding core. It is best to use a protective cover to avoid twisting the clothes and other parts of the body.
(8) In addition to the operation of the automatic measuring device installed in the lathe, the measurement of the workpiece should be stopped and the carriage moved to a safe place.
To reduce the length of the continuous chip (9), long spirals, remove the hooks in time, prohibit the use of hands.
(10) In order to prevent crashing chip broken, it should be transparent panel installed in the correct position
(11) Grinding the surface of the workpiece with emery cloth should place the tool in a safe position and do not let the clothes and hands touch the surface. To process the inner hole, we do not support the use of a finger cloth, use a stick, and the speed should not be too fast.
(12) The tool is more securely clamped, and the protruding tool does not exceed 1.5 times the height of the blade. The shape of the gasket should be the same as the size of the blade, and the gasket should be as flat as possible.